18.4.3.2 Algorithms (STFT)STFTAlgorithm
A STFT devides an input signal, {ix(n)}, into N sections according to the sliding window, and performs FFT on each sections. It can be defined as
where represents the sliding window that emphasizes local frequency components within it.
STFT is computed in the following procedure:
 Devide the input signal into N section. Each time n points are taken, where n is equal to the Window length specified.
 The chosen Window Type is used to multiply the extracted data, pointbypoint.
 Zeros will be padded on both sides of the window, if the Window length is less than the size of the FFT Length.
 FFT is computed on the FFT section.
 Move the window according to the userspecified Overlap size, and repeat steps 1 through 4 until the end of the input signal is reached.
The result of STFT is a matrix that has N columns and M rows, where
and
jth column in the matrix represents the FFT result of the jth section of the input signal and the X value of this column is the center time of the jth section. The Y values are the frequency obtained from the sampling interval and the number of input data points N. The ith frequency is given by:
About the automatic computation of the sampling interval:
When <Auto> is selected for Sampling Interval, the sampling interval needed in the computation is computed automatically by Origin.
The automatically computed sampling interval is the average increment of the time sequence, which is usually from the X column associated with the input signal. If there is no associated X column, the row numbers will be used. Note that if Origin fails to get the average increment, the sampling interval will be set to 1.
Windows
Specifies the window type used by FFT. The default option is Hanning.
 Rectangle
 Rectangular window:
 Welch
 Welch window

 Triangular
 Triangular Window:
 odd:
 even:
 Bartlett
 Bartlett window
 Hanning
 Hann Window
 Hamming
 Hamming window:

 Blackman
 Blackman window

 Gaussian
 Gaussian window:
 where Alpha is specified by the Alpha parameter.
 Kaiser
 Kaiser window:
 where I(ix) denotes Bessel Function and beta is specified by the Beta parameter.
Results
 Complex Result
Complex FFT result on each FFT section. And it is shifted so that beginning part is the result of negative frequencies.
 Amplitude Result
Onesided for real input signal and twosided for complex input signal. The definition is similar to FFT tool's amplitude. And for the twosided result shift is used so that the beginning part is the result of negative frequencies.
 Amplitude in dB
Time
Each FFT section's time in the STFT result corresponds to the center of the time interval for each section's signal. e.g. for a section interval (ti, ti+(N1)*dt), its FFT section's time in the STFT result is: ti+(N1)*dt/2.
