NAG Library Function Document

nag_4d_shep_interp (e01tkc)

 Contents

    1  Purpose
    7  Accuracy

1
Purpose

nag_4d_shep_interp (e01tkc) generates a four-dimensional interpolant to a set of scattered data points, using a modified Shepard method.

2
Specification

#include <nag.h>
#include <nage01.h>
void  nag_4d_shep_interp (Integer m, const double x[], const double f[], Integer nw, Integer nq, Integer iq[], double rq[], NagError *fail)

3
Description

nag_4d_shep_interp (e01tkc) constructs a smooth function Q x , x4 which interpolates a set of m scattered data points xr,fr , for r=1,2,,m, using a modification of Shepard's method. The surface is continuous and has continuous first partial derivatives.
The basic Shepard method, which is a generalization of the two-dimensional method described in Shepard (1968), interpolates the input data with the weighted mean
Q x = r=1 m wr x qr r=1 m wr x ,  
where qr = fr , wr x = 1dr2  and dr2 = x-xr2 2 .
The basic method is global in that the interpolated value at any point depends on all the data, but nag_4d_shep_interp (e01tkc) uses a modification (see Franke and Nielson (1980) and Renka (1988a)), whereby the method becomes local by adjusting each wr x  to be zero outside a hypersphere with centre xr  and some radius Rw. Also, to improve the performance of the basic method, each qr above is replaced by a function qr x , which is a quadratic fitted by weighted least squares to data local to xr  and forced to interpolate xr,fr . In this context, a point x  is defined to be local to another point if it lies within some distance Rq of it.
The efficiency of nag_4d_shep_interp (e01tkc) is enhanced by using a cell method for nearest neighbour searching due to Bentley and Friedman (1979) with a cell density of 3.
The radii Rw and Rq are chosen to be just large enough to include Nw and Nq data points, respectively, for user-supplied constants Nw and Nq. Default values of these arguments are provided by the function, and advice on alternatives is given in Section 9.2.
nag_4d_shep_interp (e01tkc) is derived from the new implementation of QSHEP3 described by Renka (1988b). It uses the modification for high-dimensional interpolation described by Berry and Minser (1999).
Values of the interpolant Q x  generated by nag_4d_shep_interp (e01tkc), and its first partial derivatives, can subsequently be evaluated for points in the domain of the data by a call to nag_4d_shep_eval (e01tlc).

4
References

Bentley J L and Friedman J H (1979) Data structures for range searching ACM Comput. Surv. 11 397–409
Berry M W, Minser K S (1999) Algorithm 798: high-dimensional interpolation using the modified Shepard method ACM Trans. Math. Software 25 353–366
Franke R and Nielson G (1980) Smooth interpolation of large sets of scattered data Internat. J. Num. Methods Engrg. 15 1691–1704
Renka R J (1988a) Multivariate interpolation of large sets of scattered data ACM Trans. Math. Software 14 139–148
Renka R J (1988b) Algorithm 661: QSHEP3D: Quadratic Shepard method for trivariate interpolation of scattered data ACM Trans. Math. Software 14 151–152
Shepard D (1968) A two-dimensional interpolation function for irregularly spaced data Proc. 23rd Nat. Conf. ACM 517–523 Brandon/Systems Press Inc., Princeton

5
Arguments

1:     m IntegerInput
On entry: m, the number of data points.
Constraint: m16.
2:     x[4×m] const doubleInput
Note: the i,jth element of the matrix X is stored in x[j-1×4+i-1].
On entry: x[r-1×4] ,, x[r-1×4+3] must be set to the Cartesian coordinates of the data point xr, for r=1,2,,m.
Constraint: these coordinates must be distinct, and must not all lie on the same three-dimensional hypersurface.
3:     f[m] const doubleInput
On entry: f[r-1] must be set to the data value fr, for r=1,2,,m.
4:     nw IntegerInput
On entry: the number Nw of data points that determines each radius of influence Rw, appearing in the definition of each of the weights wr, for r=1,2,,m (see Section 3). Note that Rw is different for each weight. If nw0 the default value nw=min32,m-1 is used instead.
Constraint: nwmin50,m-1.
5:     nq IntegerInput
On entry: the number Nq of data points to be used in the least squares fit for coefficients defining the quadratic functions qr x  (see Section 3). If nq0 the default value nq=min38,m-1 is used instead.
Constraint: nq0 or 14nqmin50,m-1.
6:     iq[2×m+1] IntegerOutput
On exit: integer data defining the interpolant Qx.
7:     rq[15×m+9] doubleOutput
On exit: real data defining the interpolant Qx.
8:     fail NagError *Input/Output
The NAG error argument (see Section 3.7 in How to Use the NAG Library and its Documentation).

6
Error Indicators and Warnings

NE_ALLOC_FAIL
Dynamic memory allocation failed.
See Section 2.3.1.2 in How to Use the NAG Library and its Documentation for further information.
NE_BAD_PARAM
On entry, argument value had an illegal value.
NE_DATA_HYPERSURFACE
On entry, all the data points lie on the same three-dimensional hypersurface. No unique solution exists.
NE_DUPLICATE_NODE
There are duplicate nodes in the dataset. x[k-1×4+i-1]=x[k-1×4+j-1], for i=value, j=value and k=1,2,,4. The interpolant cannot be derived.
NE_INT
On entry, m=value.
Constraint: m16.
On entry, nq=value.
Constraint: nq0 or nq14.
NE_INT_2
On entry, nq=value and m=value.
Constraint: nqmin50,m-1.
On entry, nw=value and m=value.
Constraint: nwmin50,m-1.
NE_INTERNAL_ERROR
An internal error has occurred in this function. Check the function call and any array sizes. If the call is correct then please contact NAG for assistance.
See Section 2.7.6 in How to Use the NAG Library and its Documentation for further information.
NE_NO_LICENCE
Your licence key may have expired or may not have been installed correctly.
See Section 2.7.5 in How to Use the NAG Library and its Documentation for further information.

7
Accuracy

On successful exit, the function generated interpolates the input data exactly and has quadratic precision. Overall accuracy of the interpolant is affected by the choice of arguments nw and nq as well as the smoothness of the function represented by the input data.

8
Parallelism and Performance

nag_4d_shep_interp (e01tkc) is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.
nag_4d_shep_interp (e01tkc) makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.
Please consult the x06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this function. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9
Further Comments

9.1
Timing

The time taken for a call to nag_4d_shep_interp (e01tkc) will depend in general on the distribution of the data points and on the choice of Nw and Nq parameters. If the data points are uniformly randomly distributed, then the time taken should be Om. At worst Om2 time will be required.

9.2
Choice of Nw and Nq

Default values of the arguments Nw and Nq may be selected by calling nag_4d_shep_interp (e01tkc) with nw0 and nq0. These default values, nw=min32,m-1 and nq=min38,m-1, may well be satisfactory for many applications.
If non-default values are required they must be supplied to nag_4d_shep_interp (e01tkc) through positive values of nw and nq. Increasing these argument values makes the method less local. This may increase the accuracy of the resulting interpolant at the expense of increased computational cost.

10
Example

This program reads in a set of 30 data points and calls nag_4d_shep_interp (e01tkc) to construct an interpolating function Q x . It then calls nag_4d_shep_eval (e01tlc) to evaluate the interpolant at a set of points.
Note that this example is not typical of a realistic problem: the number of data points would normally be larger.
See also Section 10 in nag_4d_shep_eval (e01tlc).

10.1
Program Text

Program Text (e01tkce.c)

10.2
Program Data

Program Data (e01tkce.d)

10.3
Program Results

Program Results (e01tkce.r)

© The Numerical Algorithms Group Ltd, Oxford, UK. 2017