NAG Library Function Document

nag_inteq_abel2_weak (d05bdc)

 Contents

    1  Purpose
    7  Accuracy

1
Purpose

nag_inteq_abel2_weak (d05bdc) computes the solution of a weakly singular nonlinear convolution Volterra–Abel integral equation of the second kind using a fractional Backward Differentiation Formulae (BDF) method.

2
Specification

#include <nag.h>
#include <nagd05.h>
void  nag_inteq_abel2_weak (
double (*ck)(double t, Nag_Comm *comm),
double (*cf)(double t, Nag_Comm *comm),
double (*cg)(double s, double y, Nag_Comm *comm),
Nag_WeightMode wtmode, Integer iorder, double tlim, double tolnl, Integer nmesh, double yn[], double rwsav[], Integer lrwsav, Nag_Comm *comm, NagError *fail)

3
Description

nag_inteq_abel2_weak (d05bdc) computes the numerical solution of the weakly singular convolution Volterra–Abel integral equation of the second kind
yt = ft + 1π 0t kt-s t-s g s,ys ds ,   0tT . (1)
Note the constant 1π in (1). It is assumed that the functions involved in (1) are sufficiently smooth.
The function uses a fractional BDF linear multi-step method to generate a family of quadrature rules (see nag_inteq_abel_weak_weights (d05byc)). The BDF methods available in nag_inteq_abel2_weak (d05bdc) are of orders 4, 5 and 6 (=p say). For a description of the theoretical and practical background to these methods we refer to Lubich (1985) and to Baker and Derakhshan (1987) and Hairer et al. (1988) respectively.
The algorithm is based on computing the solution yt in a step-by-step fashion on a mesh of equispaced points. The size of the mesh is given by T/N-1, N being the number of points at which the solution is sought. These methods require 2p-1 (including y0) starting values which are evaluated internally. The computation of the lag term arising from the discretization of (1) is performed by fast Fourier transform (FFT) techniques when N>32+2p-1, and directly otherwise. The function does not provide an error estimate and you are advised to check the behaviour of the solution with a different value of N. An option is provided which avoids the re-evaluation of the fractional weights when nag_inteq_abel2_weak (d05bdc) is to be called several times (with the same value of N) within the same program unit with different functions.

4
References

Baker C T H and Derakhshan M S (1987) FFT techniques in the numerical solution of convolution equations J. Comput. Appl. Math. 20 5–24
Hairer E, Lubich Ch and Schlichte M (1988) Fast numerical solution of weakly singular Volterra integral equations J. Comput. Appl. Math. 23 87–98
Lubich Ch (1985) Fractional linear multistep methods for Abel–Volterra integral equations of the second kind Math. Comput. 45 463–469

5
Arguments

1:     ck function, supplied by the userExternal Function
ck must evaluate the kernel kt of the integral equation (1).
The specification of ck is:
double  ck (double t, Nag_Comm *comm)
1:     t doubleInput
On entry: t, the value of the independent variable.
2:     comm Nag_Comm *
Pointer to structure of type Nag_Comm; the following members are relevant to ck.
userdouble *
iuserInteger *
pPointer 
The type Pointer will be void *. Before calling nag_inteq_abel2_weak (d05bdc) you may allocate memory and initialize these pointers with various quantities for use by ck when called from nag_inteq_abel2_weak (d05bdc) (see Section 3.3.1.1 in How to Use the NAG Library and its Documentation).
Note: ck should not return floating-point NaN (Not a Number) or infinity values, since these are not handled by nag_inteq_abel2_weak (d05bdc). If your code inadvertently does return any NaNs or infinities, nag_inteq_abel2_weak (d05bdc) is likely to produce unexpected results.
2:     cf function, supplied by the userExternal Function
cf must evaluate the function ft in (1).
The specification of cf is:
double  cf (double t, Nag_Comm *comm)
1:     t doubleInput
On entry: t, the value of the independent variable.
2:     comm Nag_Comm *
Pointer to structure of type Nag_Comm; the following members are relevant to cf.
userdouble *
iuserInteger *
pPointer 
The type Pointer will be void *. Before calling nag_inteq_abel2_weak (d05bdc) you may allocate memory and initialize these pointers with various quantities for use by cf when called from nag_inteq_abel2_weak (d05bdc) (see Section 3.3.1.1 in How to Use the NAG Library and its Documentation).
Note: cf should not return floating-point NaN (Not a Number) or infinity values, since these are not handled by nag_inteq_abel2_weak (d05bdc). If your code inadvertently does return any NaNs or infinities, nag_inteq_abel2_weak (d05bdc) is likely to produce unexpected results.
3:     cg function, supplied by the userExternal Function
cg must evaluate the function gs,ys in (1).
The specification of cg is:
double  cg (double s, double y, Nag_Comm *comm)
1:     s doubleInput
On entry: s, the value of the independent variable.
2:     y doubleInput
On entry: the value of the solution y at the point s.
3:     comm Nag_Comm *
Pointer to structure of type Nag_Comm; the following members are relevant to cg.
userdouble *
iuserInteger *
pPointer 
The type Pointer will be void *. Before calling nag_inteq_abel2_weak (d05bdc) you may allocate memory and initialize these pointers with various quantities for use by cg when called from nag_inteq_abel2_weak (d05bdc) (see Section 3.3.1.1 in How to Use the NAG Library and its Documentation).
Note: cg should not return floating-point NaN (Not a Number) or infinity values, since these are not handled by nag_inteq_abel2_weak (d05bdc). If your code inadvertently does return any NaNs or infinities, nag_inteq_abel2_weak (d05bdc) is likely to produce unexpected results.
4:     wtmode Nag_WeightModeInput
On entry: if the fractional weights required by the method need to be calculated by the function then set wtmode=Nag_InitWeights.
If wtmode=Nag_ReuseWeights, the function assumes the fractional weights have been computed on a previous call and are stored in rwsav.
Constraint: wtmode=Nag_InitWeights or Nag_ReuseWeights.
Note: when nag_inteq_abel2_weak (d05bdc) is re-entered with the value of wtmode=Nag_ReuseWeights, the values of nmesh, iorder and the contents of rwsav MUST NOT be changed.
5:     iorder IntegerInput
On entry: p, the order of the BDF method to be used.
Suggested value: iorder=4.
Constraint: 4iorder6.
6:     tlim doubleInput
On entry: the final point of the integration interval, T.
Constraint: tlim>10×machine precision.
7:     tolnl doubleInput
On entry: the accuracy required for the computation of the starting value and the solution of the nonlinear equation at each step of the computation (see Section 9).
Suggested value: tolnl=ε where ε is the machine precision.
Constraint: tolnl>10×machine precision.
8:     nmesh IntegerInput
On entry: N, the number of equispaced points at which the solution is sought.
Constraint: nmesh=2m+2×iorder-1, where m1.
9:     yn[nmesh] doubleOutput
On exit: yn[i-1] contains the approximate value of the true solution yt at the point t=i-1×h, for i=1,2,,nmesh, where h=tlim/nmesh-1.
10:   rwsav[lrwsav] doubleCommunication Array
On entry: if wtmode=Nag_ReuseWeights, rwsav must contain fractional weights computed by a previous call of nag_inteq_abel2_weak (d05bdc) (see description of wtmode).
On exit: contains fractional weights which may be used by a subsequent call of nag_inteq_abel2_weak (d05bdc).
11:   lrwsav IntegerInput
On entry: the dimension of the array rwsav.
Constraint: lrwsav2×iorder+6×nmesh+8×iorder2-16×iorder+1.
12:   comm Nag_Comm *
The NAG communication argument (see Section 3.3.1.1 in How to Use the NAG Library and its Documentation).
13:   fail NagError *Input/Output
The NAG error argument (see Section 3.7 in How to Use the NAG Library and its Documentation).

6
Error Indicators and Warnings

NE_ALLOC_FAIL
Dynamic memory allocation failed.
See Section 2.3.1.2 in How to Use the NAG Library and its Documentation for further information.
NE_BAD_PARAM
On entry, argument value had an illegal value.
NE_FAILED_START
An error occurred when trying to compute the starting values.
NE_FAILED_STEP
An error occurred when trying to compute the solution at a specific step.
NE_INT
On entry, iorder=value.
Constraint: 4iorder6.
NE_INT_2
On entry, lrwsav=value.
Constraint: lrwsav2×iorder+6×nmesh+8×iorder2-16×iorder+1; that is, value.
On entry, nmesh=value and iorder=value.
Constraint: nmesh=2m+2×iorder-1, for some m.
On entry, nmesh=value and iorder=value.
Constraint: nmesh2×iorder+1.
NE_INTERNAL_ERROR
An internal error has occurred in this function. Check the function call and any array sizes. If the call is correct then please contact NAG for assistance.
See Section 2.7.6 in How to Use the NAG Library and its Documentation for further information.
NE_NO_LICENCE
Your licence key may have expired or may not have been installed correctly.
See Section 2.7.5 in How to Use the NAG Library and its Documentation for further information.
NE_REAL
On entry, tlim=value.
Constraints: tlim>10×machine precision.
On entry, tolnl=value.
Constraint: tolnl>10×machine precision.

7
Accuracy

The accuracy depends on nmesh and tolnl, the theoretical behaviour of the solution of the integral equation and the interval of integration. The value of tolnl controls the accuracy required for computing the starting values and the solution of (2) at each step of computation. This value can affect the accuracy of the solution. However, for most problems, the value of ε, where ε is the machine precision, should be sufficient.

8
Parallelism and Performance

nag_inteq_abel2_weak (d05bdc) is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.
nag_inteq_abel2_weak (d05bdc) makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.
Please consult the x06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this function. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9
Further Comments

In solving (1), initially, nag_inteq_abel2_weak (d05bdc) computes the solution of a system of nonlinear equations for obtaining the 2p-1 starting values. nag_zero_nonlin_eqns_rcomm (c05qdc) is used for this purpose. When a failure with fail.code= NE_FAILED_START occurs (which corresponds to an error exit from nag_zero_nonlin_eqns_rcomm (c05qdc)), you are advised to either relax the value of tolnl or choose a smaller step size by increasing the value of nmesh. Once the starting values are computed successfully, the solution of a nonlinear equation of the form
Yn-αgtn,Yn-Ψn=0, (2)
is required at each step of computation, where Ψn and α are constants. nag_inteq_abel2_weak (d05bdc) calls nag_zero_cont_func_cntin_rcomm (c05axc) to find the root of this equation.
If a failure with fail.code= NE_FAILED_STEP occurs (which corresponds to an error exit from nag_zero_cont_func_cntin_rcomm (c05axc)), you are advised to relax the value of the tolnl or choose a smaller step size by increasing the value of nmesh.
If a failure with fail.code= NE_FAILED_START or NE_FAILED_STEP persists even after adjustments to tolnl and/or nmesh then you should consider whether there is a more fundamental difficulty. For example, the problem is ill-posed or the functions in (1) are not sufficiently smooth.

10
Example

In this example we solve the following integral equations
yt = t + 38 π t2 - 0t 1 t-s y s 3 ds ,   0t7 ,  
with the solution yt=t, and
y t = 3-t t - 0t 1t-s exp s 1-s 2 - ys 2 d s ,   0t5 ,  
with the solution yt=1-tt. In the above examples, the fourth-order BDF is used, and nmesh is set to 26+7.

10.1
Program Text

Program Text (d05bdce.c)

10.2
Program Data

None.

10.3
Program Results

Program Results (d05bdce.r)

© The Numerical Algorithms Group Ltd, Oxford, UK. 2017